Wildflower Blue Mountains Linocut Carving 2

Well I have been steadily working on the linocut carving. Took a break for a day yesterday but back at it today.

Started with the final central waratah that needed carving. I have already carved the outline with a final linocut carving tool to start. I then use a v or u gouge tool to take out the centre of each of the sections outline. The carved out parts create the white spaces of the work which I can then handcolour of I choose to.

Blue Mtns Wildflowers 11

I usually always turn the carving upside down or sideways to check the edges of the carving to make sure I have carved nice clean & neat lines so when printed I get a clean  finish to the edges of the design. You can see some of the areas that need to be cleaned up if you look closely.

Blue Mtns Wildflowers 12

I am not the best at getting exact measurements so I took over an hour to make sure I had the panels in this piece as evenly mirror reversed as possible.

Blue Mtns Wildflowers 13

I tend to get a bit freaked out at this point. I measure carefully but lino does not always cut straight up as it, unlike wood, has some flexibility in it. So I took my time and went slowly as possible to carefully cut these lines. I want the panel structure of this design to be as straight and even as possible to get the Deco Art influence and the mirror from that era reflected in the design as closely as possible.

Blue Mtns Wildflowers 14

So finally the six lines are carefully finished. This particular design has stepped in panels so I need to cut different lines to create the edge of the work.

Blue Mtns Wildflowers 2

I start be cutting a the edge of the work with a sharp blade (Stanley Knife) slicing several times to created a deeper cut. I then VERY carefully crack the rest of the lino. If you have carving up to the edge you need to do this VERY carefully. If you do not take things slowly you are likely to split the lino in the wrong place.

Blue Mtns Wildflowers 3

I then turn over the lino block and carefully slit the hessian backing and remove the piece of lino.

Blue Mtns Wildflowers 4 Blue Mtns Wildflowers 5

This process makes creating the edges easier but tends to leave them a bit rough and they need to be cleaned up.

Blue Mtns Wildflowers 6

In my new linocut tools there is a lovely large flat blade which is perfect for running along the edges to clean them up.Did I mention I love my new linocutting tools. Mainly because they are so sharp and easy to use making it much easier on my shoulder for carving. They also help me achieve the image that I am looking for. The tools are simply a way to create the design in the lino, it is the final image that is the artwork. I do not see them any different to using brushes, computers, screens, knives, chisels or anything else an artist may use in order to create the final work of art. This is the set of tools I now have. My family bought them for me for Christmas and they make my life so much easier.

Pfeil Lino Cutting Tools

But for making a neat edge you can also use a sharp blade or a stanley knife.

Blue Mtns Wildflowers 7

here is the cleaned up edge which means the final print artwork edges will be nice and clean as well.

Blue Mtns Wildflowers 8

And FINALLY! The finished lino block ready for printing.

Blue Mtns Wildflowers 10 CARVING FINAL

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s